:: Welcome to Interline Building Enterprises Pty Ltd

	Home \| About Us \| Flashings \| Manufacturing \| Installation \| Colours \| Metal Fascia \| Quad \| Ogee \| Square Line \| Contact Us

Ogee Gutter has traditionally been a long time favourite particularly on classic older buildings and with the increased popularity of colonial type buildings this gutter is extremely attractive.

Cost Savings

IBE Ogee Gutters is continuously roll formed from .'55 gauge coil steel and therefore has low initial cost. Labour savings in erection time are also made because of the quick and easy method of attaching to the Fascia. Because of the protective coating there is very little cost involved in maintaining IBE Ogee as it lasts years without being touched.

Protection

Zincalume® and Pre-painted Zincalume® coated steel provides the best protection from the environment and gives long life to any building.

Lengths

IBE Ogee Gutter can be cut in the factory to any length specified by the customer. Using longer lengths eliminates joints and gives a neat appearance. (Max. 8m)

Support Recommendations

Cutter Brackets are to be placed at Stop Ends and between Stop Ends at intervals of not more than 1200mm. Where Metal Fascia is used.

Compatibility

Lead flashings and copper or copper alloy materials should not be used with or in run-off situations with Zincalume® sheeting. Also do not use lead head nails.

Sealing

Zincalume® or pre-painted material cannot be soldered and to seal a suitable sealant and mechanical fasteners must be used.

Colour Options

A wide range of colours are available in gutters, down pipes and general rainwater products. Click the word COLOURS to view the range available. Contact us today for more information on your colour of choice.

Finish

IBE Ogee is available in the following finishes:
a. Standard Zincalume®
b. Pre-Prime coated Zincalume® suitable for painting.
c. Pre-painted Zincalume® in a wide range of colours.
(For a colour chart, please contact our office.)



115mm Ogee Gutter

AUSTRALIA